azért siyah oldalán igencsak kevéske info van a .3.5-röl
ehez képest.
Features:
DISABLED CAP_ERASE (No superbrick bug)
All-in-1kernel because it supports CM9, CM10, Samsung, MIUI and Boot-to-Gecko (B2G) ROMs with a single kernel image.
Dual booting support for all supported ROM types. See droidphile's post for Dual Booting FAQ
Custom CWM touch recovery with swipe gestures and double-tap selection
configurable number of frequency steps (default 6-steps, 200MHz to 1400MHz) you can have 3 to 18 steps. available steps are (in MHz) 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800, 700, 600, 500, 400, 300, 200, 100, 50, 25.
3-step GPU frequency levels. Samsung default is 160-267 whereas SiyahKernel default is 160-200-267 which saves power without sacrificing performance.
Auto-root. You can also remove root via ExTweaks app and install it without rebooting your phone again. Auto-root can be disabled as well.
CPU Overclock/Undervolt support (we have two interfaces for that. both of them are defacto standard)
Tweakable vitalij's value (set to 5 as default)
Adjustable touchpad led brightness
Fixed fuelalert wakelocks
You can completely disable android logger using ExTweaks app
Faster charging for misc and USB modes. There are 3 modes (AC, Misc, USB) and normally last two of them support only slow charging. You can have charging speed of AC by increasing it (especially user while charging in car or using USB port)
Cpu governor optimizations
Gpu voltage, clock and stepcount interfaces (GPU Overclock/Undervolt)
Screen brightness curve settings with original panel gamma values. panel values unchanged, so you will get stock colors and will be able to use supercurio's voodoo display app when it is released. brightness modification will only change auto-brightness response.
BLN support both for Samsung and CM ROMs (you can use ExTweaks, Nstools or BLNControl app from the market to enable it)
Breathing or Blinking effect for BLN. (Make sure you don't enable blinking in any other BLN app) Use ExTweaks to select one of them.
Better touch sensitivity
Available CPU Governors: Pegasusq (default), Ondemand, Lulzactive, SmartassV2, Interactive and Conservative, Performance, Userspace, Powersave
CIFS as module
Available I/O schedulers: CFQ (default), noop, Deadline, SIO, V(R)
J4FS as module
ARM topology support (SCHED_MC)
Automatic EFS Backup
Lots of I/O tweaks and filesystem optimizations via some parts of thunderbolt scripts.
Voodoo louder support (already default in all kernels but people ask it if it is supported)
USB Mass Storage mode is working in CWM Touch Recovery and you can mount both internal and external sdcard as a disk drive
NTFS automounting for USB sticks. When you plug in an NTFS formatted USB flash it will be automatically mounted to /mnt/ntfs folder.
USB mouse and keyboard support
built-in profile support with default, battery and performance presets (you can change them in CWM Recovery). Even using everything default will save you a lot of battery juice.
Soundgasm for headphone amplification
Almost everything is configurable such as scheduler features, hotplug thresholds, GPU frequencies, voltages, arm topology modes... and they are configurable via simple and free ExTweaks App from Google Play
Adjustable mDNIe settings (thanks to sakura)
mDNIe negative effect toggle with home button (press it four times)
