visitors can't see pics , please You are not allowed to view links.
Register or
Login or You are not allowed to view links.
Register or
LoginA Siyah kernelnek van egy nagyszerű opciója, mégpedig hogy egyszerre két futtatható romot is tarthatunk, a telefonunkon, ez pedig a
Dual Boot opció! Magyarul, a rendszer indítása előtt kiválaszthatjuk, hogy melyik romot szeretnénk használni éppen
You are not allowed to view links.
Register or
Login - nek köszönhetően itt egy Magyar leírás, hogyan is kell ezt használni, amit ezúttal is köszönünk neki
Második rom telepítése:
1. Először kell telepítsd a Siyah kernelt, cwm-ből vagy odin-nal
2. Miután feltetted a Siyah kernelt, indítsd újra és hagyd hogy az Android frissítse magát
3. Miden megvolt? Rendben, menj tovább a következő lépésre.
4. Töltsd le a neked tetsző romot amit másodikként szeretnél, és helyezd biztos helyre a belső SD-re.
5. Ezután, lépjél be a CWM Recoverybe, és lépj a "dual-boot options" menüpontra.
6. Látni fogsz egy bállítás listát, ezeket:
- View current status - megmutatja a jelenlegi dual boot állapotát
- Clone 1st ROM to 2nd ROM - ez a beállítás lemásolja a jelenlegi Romot amit használsz (pl CM9), és beileszti második ROMként. 7-20 percet vehet igénybe.
- Clone 2nd ROM to 1st ROM - lemásolja a második romot (miután már telepítetted) és beilleszti az első ROM helyére lecserélve azt.
- Remove 2nd ROM - teljesen törli a második rom fájljait és mappáit
- Swap 1st ROM and 2nd ROM - felcseréli a két ROMot
Innentől gondolom érthető:
- Install zip to 2nd ROM from Internal SD card
- Install zip to 2nd ROM from External SD card
- Wipe 2nd ROM data/cache - itt annyit hogy ezt mindenképp futtatni kell mielőtt telepíteni akarod a második Romot. Ez hozza létre a data és cache partíciókat.
- Wipe 2nd ROM dalvik-cache
- Fix 2nd ROM permissions
- Backup 2nd ROM
- Restore as 2nd ROM
- Backup 2ndRom to internal SD
- Restore as 2nd ROM from internal SD
7. Válaszd a Wipe 2nd Rom data/cahe opciót. Ez előkészíti neked a második Romnak szükséges data és cahe partíciókat. 5-7 percet vehet igénybe.
8. Mikor kész, válaszd a wipe the dalvik cache opciót.
9. Mikor az is kész, válaszd az "Install zip to 2nd ROM from Internal SD card" vagy az "Install zip to 2nd ROM from External SD card" opciót attól függően hogy hol található a második Rom és telepítsd a ROMot.
10. Várj pár percet amíg telepíti a Romot.
11. Újraindítás
12. Nyomd le a Home vagy a hangerő le gombot mikor elkezd háromtól visszaszámolni ahhoz hogy a második ROM induljon.___________________________________________________________________________________________________________
SiyahKernel S2-v4.1.5Posted on September 8, 2012
-update 4.1.4 -> 4.1.5: fixed /mnt/ntfs directory creation problem (ntfs mounting over usb otg should be working now). lulzactiveq (and one of my mistake in lulzactive) fixes by robertobsc@XDA. enabled NFS module (if you don’t know what it is then you don’t need it).
You are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
LoginMIRROR: You are not allowed to view links.
Register or
Login______________________________________________________________________________________________________________
SiyahKernel S2-v4.1.4Posted on August 27, 2012
Changelog:
-update 4.1.3 -> 4.1.4: fixed vibration intensity problem with samsung roms. fixed adb in recovery. compiled with linaro 4.7 (2012.08) toolchain. fixed mass storage mounting problem.
You are not allowed to view links.
Register or
Login______________________________________________________________________________________________________________
SiyahKernel S2-v4.1.1Posted on August 22, 2012
Changelog:
-update 4.1 -> 4.1.1: fixed the problem with external sdcard in some roms because of forgotten unmount in init script.
Download: You are not allowed to view links.
Register or
Login______________________________________________________________________________________________________________
SiyahKernel S2-v4.0.1Posted on August 5, 2012
Changelog:
based on update7 sources
supports Samsung 4.0.3/4.0.4 (no camera problem), CM9, CM10 and MIUI
all the changes from v3.5.2 are applied
no CAP_ERASE, no hardbrick
fixed CM10 led behavior
fixed led_fadeout behavior
fixed autorotation problem with CM10 and 4.0.3 ROMs
enabled swap and zram options in config. enabled zram as default with 150MB swap. you can disable it in extweaks.
CWM-based Touch Recovery v6.0.1.1 Postponed
Update v4.0 -> v4.0.1: some changes in initramfs to fix boot problems with some ROMs.
Download: You are not allowed to view links.
Register or
Login______________________________________________________________________________________________________________
SiyahKernel S2-v3.5.2Posted on July 29, 2012
Changelog:
added Jellybean support
updated wireless driver (1.15.12 -> 1.15.15)
replaced superuser with supersu (only when autorooting, your existing app won’t be replaced)
updated modem driver
removed some unused binaries from initramfs
Linux 3.0.38
Update 3.5 -> 3.5.1: fixed brightness and led problems. changed compression to gzip for faster boot (increased size)
update 3.5.1 -> 3.5.2 fixed CM10 booting problem
You are not allowed to view links.
Register or
Login (for Odin)
You are not allowed to view links.
Register or
Login (for CWM Recovery)
______________________________________________________________________________________________________________
SiyahKernel SGS2 v3.4Posted on July 18, 2012
Changelog:
based on i9100 update6 sources
fixed /vendor symlink for cm9/aosp roms
Linux 3.0.37
Warning: only tested on stock 4.0.3 ROM.
Download from s2 folder:You are not allowed to view links.
Register or
Login______________________________________________________________________________________________________________
SiyahKernel SGS2 v3.3.3Posted on July 8, 2012
Changelog:
pegasusq fixes and tweaks
added cfs tweaks settings to ExTweaks (samsung default, linux kernel default and thunderbolt script defaults)
added Tungstwenty’s implementation that let’s us see deleted wakelock details (optional in ExTweaks)
cherry-picked some wifi changes/fixes from cm9 repo
added mdnie negative effect toggle to ExTweaks (by Tungstwenty)
and some other tiny changes…
Linux 3.0.36
update (3.3.3 -> 3.3.3b) removed some potentially unsafe changes which might be the reason of some users having problems with the latest release.
update(3.3.3b -> 3.3.3c) added ntt device gps support back. removed exfat related mess. added Entropy512′s patch to prevent multicast packets for added headphone amplification setting to extweaks (named it soundgasm). fixed data statistics and some other changes in config and sources…
update(3.3.3c -> 3.3.3d) main wakelock fix by tungstwenty
You are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
Login______________________________________________________________________________________________________________
SiyahKernel SGS2 v3.3.2Posted on June 12, 2012
Changelog:
USB mode selection in ExTweaks (default, force mass storage, force mtp)
some tweaks & patches from upstream
GENTLE_FAIR_SLEEPERS and ARCH_POWER selection in ExTweaks
battery charging animation, service and lpm.rc from CM9
wifi country code lookup part delegated back to the driver code
Linux 3.0.34
You are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
Login______________________________________________________________________________________________________________
SiyahKernel v3.3.1Posted on June 4, 2012
Changelog:
removed lots of experimental patches and merges. why? because I got my i9300 today and my i9100 will be used by my wife and I don’t want her to complain too much.
Linux 3.0.33
updated on 5th June: merge with linux 3.0.y branch.
You are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
Login______________________________________________________________________________________________________________
Siyah v3.2.6Posted on May 24, 2012
Changelog:
new usb host driver. works fine with mouse, usb sticks and serial port adapters.
some wifi patches from n7000 sources. ioctl timeout is reduced from 20 secs to 5 secs.
fixed ntfs mounting and added ntfs-3g binary back. it will not be used if “ntfs mounter” app is installed. otherwise, ntfs sticks will be mounted read-only in /mnt/ntfs folder.
changed pegasusq governor defaults using AndreiLux’s settings. see this post for details
disabled force-install of superuser but I highly recommend you to “remove root” in extweaks and restart after flashing this kernel to prevent lockups and force-closes.
added scaling_min_freq and scaling_max_freq settings to extweaks. default is 100-1200MHz, battery profile default is 100-1000MHz, performance profile default is 200-1200MHz
just a little tweak to mdnie settings… see /sbin/ext/tweaks.sh for details
You are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
Login______________________________________________________________________________________________________________
SiyahKernel v3.2.4Posted on May 16, 2012
Changelog:
enabled pegasusq governor. any other existing hotplug mechanisms will be disabled if you select it.
enabled smooth scaling for pegasusq governor
set pegasusq governor as default governor using extweaks settings. ondemand will still be the default governor for recovery.
set charging touch sensitivity movfilter value the same as battery movfilter value.
default lower freq level is set to 200MHz. do not use 25 or 50 if you are going to use pegasusq or ondemand.
You are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
Login
SiyahKernel v3.2.3Posted on May 14, 2012
Changelog:
new feature: “fix permissions in 2ndROM” in dual-boot menu
new option: checkbox for “turn on the touchkey lights when the screen is touched” in ExTweaks
you will have an error when trying to flash to 2ndROM before running ‘Wipe 2ndROM data/cache’ at least once. you need to create 2ndROM data and cache files in your sdcard first.
set lulzactive default pump up/down steps depending on the frequency table step size. Default values will be initialized using the number of steps between 500MHz and 800MHz which is 3 with 18 steps.
rebased lulzactive logic on new interactive governor
new option: very simple CPU Undervolting in ExTweaks. -25, -50, -75, -100mV for all levels.
progress bar for “Wipe 2ndROM data&cache” if it is performed for the first time.
added adjustable mDNIe settings (thanks to sakura). you can use init.d script to modify the settings. the interface files are in /sys/devices/platform/samsung-pd.2/mdnie/mdnie/mdnie directory. echo 1 to user_mode and change “user_cb” and “user_cr”. default values are 128 and valid range is 0-255.
You are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
Login
SiyahKernel v3.2.1Posted on May 10, 2012
Changelog:
- removed ntfs-3g from the payload part to make the kernel smaller (I want to enable LZO instead of GZIP). if you want ntfs-3g you can find it here
- enabled kernel’s ntfs support to mount usb flashes in read-only mode
- LZO, to have even faster booting
- re-enabled j4fs and mounting of lfs partition (hellcat’s boot logo changer worked, even if it stuck with “working” popup, but it could successfully set my cat’s photo as a boot logo
)
- reverted 267MHz GPU voltage back to 1000mV. if you did not have a problem with v3.2, you can set it back to 950 (or even lower) with ExTweaks.
- fixed vdd_levels interface. it was supposed to be using milivolts but I noticed that it was using microvolts when I tried to echoing it ‘-50′ to undervolt all steps by 50mV.
SiyahKernel v3.2Posted on May 10, 2012
Changelog:
- removed nandroid backup from/restore to 2ndROM. There is a problem which I have just noticed and it will take some time to fix that. Use swap&backup until I fix it.
- default lower cpu step is set to 100MHz
- your extweaks settings will be automatically reset after flashing this version
- used Linaro toolchain 4.7 (2012.04) which let me use gzip without exceeding 8MB
You are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
Login
SiyahKernel v3.1.2Posted on April 24, 2012
Changelog:
- fixed cm9 mount point problems
- modifications in secondrom booting and mounting methods. you will be able to mount both sdcards using USB Mass Storage mode in the second ROM. just make sure you don’t delete “.secondrom” folder
- cm9 as second rom should behave just the same as primary. no more emmc/sdcard swapping. removal of external sdcard will not affect functioning of any app.
- merge with linux upstream (3.0.29)
You are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
Login
SiyahKernel v3.1Posted on April 19, 2012
Changelog (including the changes from all previous 3.1 beta and rc builds):
-USB serial support
-USB mouse and keyboard support and fixed crash on unplug (thanks to sztupy for his galaxy s kernel sources and kevinh for the patches)
-latest CM9 support
-new liblights which supports both Samsung and cm9 ROMs+kernels to prevent problems when users flash stock or speedmod kernels.
-re-enabled CGROUP_TIMER_SLACK and SCHED_AUTOGROUP
-disabled smooth scaling for interactive based governors (lulzactive and interactive)
-Dual-booting
-prevented tick sound after reboots or in download/recovery modes
-sio fifo_batch=1
-adjustable gamma and vibrator levels (thanks to myfluxi)
-added gamma and vibrator level adjustments to ExTweaks app
-removed 1600MHz and 100MHz steps
-merged with cm9 sources (some patches for at&t version and lots of cleanups/rewrites. thanks to ---teamhacksung and Entropy512)
-default I/O scheduler is set to CFQ.for default profile.
-CIFS is now built-in, no longer a module, to save space
-Superuser.apk, su, CWMManager.apk and ntfs-3g files are moved to the end of the kernel and won’t be --decompressed unless they are needed to speed up the boot time.
-samsung recovery binaries and some unnecessary files moved to the end of the kernel image to eliminate -unnecessary decompression. those will be decompressed only when you boot into recovery, which will make the -booting process faster.
-Implemented clone primary to secondary, clone secondary to primary and swap primary/secondary ROMs in CWM Recovery
-updated to linux 3.0.28
-fixed ntfs automount for usb sticks. it will be mounted to /mnt/ntfs
-changed “format /emmc” and “format /sdcard” to “format internal sdcard” and “format external sdcard” to -prevent confusion. In CWM Recovery, /emmc is internal sdcard and /sdcard is the external.
You are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or
LoginYou are not allowed to view links.
Register or Login