Téma: OnePlus 3 - ROM-ok, kernelek, custom recovery, root

[Rizsi]

[BETA][2016.09.15] SuperSU v2.78 SR1
You are not allowed to view links. Register or Login

SRx instead of BETA
We're moving from BETA to Service Release naming, so we can keep the version number for the next test release the same as the current stable release. So, v2.78 SR1 is what would have been v2.79 BETA before.

While this may be slightly more confusing, we need to keep the version numbers the same to reduce the effectiveness of people trying to upload the test releases to stores (many stores will not accept a version number already present). Surprisingly, this is a real problem on non-Play stores.

Changelogs
15.09.2016 - v2.78 - SR1
- subinary: Adjust app_process detection with manipulated mount namespaces
- subinary: Adjust Zygote PID detection to prefer 64-bit
- subinary: Fix possible NPE in LD_PRELOAD sanitization
- subinary: In systemless mode, ensure PATH contains /su/bin and /su/xbin
- supolicy: Ensure zero-on-alloc for new rules
- supolicy: Fix parsing allowxperm with multiple sources/targets in a single definition
- ZIP/Systemless: Give su.d 60 seconds to execute (from 4 seconds)

[Rizsi]

Sajnos a Slim GAPPS mar egy ideje nincs frissitve. Viszont van helyette: You are not allowed to view links. Register or Login
Verziok osszahasonlitasa: You are not allowed to view links. Register or Login
Changelog: You are not allowed to view links. Register or Login
XDA thread: You are not allowed to view links. Register or Login

[TaRsY]

Ajánlom figyelmetekbe ezt a romot!
You are not allowed to view links. Register or Login

Tegnap feltoltam en is, akartam is kérdezni, nálad hogy szuperal.  Itt zsir minden.

Sent from my ONEPLUS A3003 using Tapatalk

[nyzoli72]

Tegnap feltoltam en is, akartam is kérdezni, nálad hogy szuperal.  Itt zsir minden.

Sent from my ONEPLUS A3003 using Tapatalk

ahogy mondtam, hiba nélkül zakatol:) eddig arter féle cm-en voltam, de néha újra indult mikor már sokáig használtam folyamatosan a wazet pl. Na ezt ugye még nem próbáltam ki ezzel majd jövőhétre marad. Ajánlom másnak is legalább kipróbálásra, nem bánja meg... Szerintem az N-ig már ez marad

[Rizsi]

OxygenOS 3.2.6 rolling out for OnePlus 3
OTA Zip 3.2.4->3.2.6: You are not allowed to view links. Register or Login

OxygenOS 3.2.6 Full Zip: You are not allowed to view links. Register or Login


Changelog:

●Optimized voice call quality of some IM applications.

●Improved adaptive brightness performance

●Improved camera quality

•Fixes occasional green/yellow issue
•Optimized white balance
•Improved 1080p video recording

●Addressed some bluetooth connection problems for vehicles

●Allows third party application to modify ringtone

●Optimized battery consumption when scrolling

●Optimized touch accuracy when playing games

●Added DozeMode switch in Developer options

●Added PocketMode switch in Display settings

[nyzoli72]

OxygenOS 3.2.6 rolling out for OnePlus 3
OTA Zip 3.2.4->3.2.6: You are not allowed to view links. Register or Login

OxygenOS 3.2.6 Full Zip: You are not allowed to view links. Register or Login


Changelog:

●Optimized voice call quality of some IM applications.

●Improved adaptive brightness performance

●Improved camera quality

•Fixes occasional green/yellow issue
•Optimized white balance
•Improved 1080p video recording

●Addressed some bluetooth connection problems for vehicles

●Allows third party application to modify ringtone

●Optimized battery consumption when scrolling

●Optimized touch accuracy when playing games

●Added DozeMode switch in Developer options

●Added PocketMode switch in Display settings

Nagy gondot is okozott azoknál akik erről akartak átjönni valamelyik custom romra, mert elcseszte az ujjlenyomat érzékelőt. Úgy olvastam hogy belenyúltak a firmware-be és ez az oka, szóval óvatosan vele:) Mármint akkor ha erről mennétek cm-re vagy bárhova...

[Rizsi]

GUIDE} Jumping between 3.5.2/3.2.6 and New Released CM based Roms (Eg: RR 5.7.4)


STEP 1 : Grab firmware for 3.2.6 from this link and flash. flashing this will BREAK your fingerprint sensor. WAIT read on.
You are not allowed to view links. Register or Login

STEP 2: Now flash latest twrp 3.0.2.1 . Now you are on the latest twrp.
You are not allowed to view links. Register or Login

STEP 3: Now Flash firmware for 3.2.4 from this link. YOU HAVE your finger print sensor back..!
You are not allowed to view links. Register or Login

Now you have the latest twrp again and also can flash anything you want to..!!
Thanks to Oneplus for screwing this..!

[Rizsi]

[KERNEL] [September 20] ElementalX-OP3 0.21 (OOS) 0.30 (cm)
OxygenOS/HydrogenOS/Stock-based ROMs: You are not allowed to view links. Register or Login

Changes:
-fix disable touchboost setting
-upstream WiFi change

Cyanogenmod-based ROMs: You are not allowed to view links. Register or Login

Changes:
-fix disable touchboost setting
-latest cyanogenmod changes

[Rizsi]

[KERNEL] [OnePlus3] [CM13] Boeffla-Kernel (21-09-2016)
You are not allowed to view links. Register or Login

This kernel will NOT work on CM builds !!!


Version 1.0-beta5
21.09.2016
Update: Merged official OnePlus kernel code update for OOS 3.2.6
Change: Use exactly same wifi driver version as official OOS 3.2.6 stock kernel
Change: Build script improvements

[Rizsi]

[KERNEL] [OnePlus3] [CM13] Boeffla-Kernel (21-09-2016)
You are not allowed to view links. Register or Login

This kernel will NOT work on OOS or any other builds than CM !!!


Version 1.0-beta5
21.09.2016
Update: Updated with latest official CM kernel commits as of 21.09.16, 8am CET
New: Implemented Boeffla touchkey LED control v1.1.0
Configuration options:
- current standard settings: LED enabled when using touchscreen or touchkeys (time controlled by the rom)
- option to enable LED only when touchkeys are used (time either controlled by rom or fully controlled by the kernel, set time in Boeffla-Config)
- option to disable LED always (fully controlled by the kernel)
Change: Build script improvements

[Rizsi]

[KERNEL] [September 21] ElementalX-OP3 0.22 (OOS)
OxygenOS/Stock-based ROMs: You are not allowed to view links. Register or Login

Changes:
-OnePlus updates

[Rizsi]

vx2ko Today, 03:03 AM
"OP3Lite 2.4 coming tomorrow everyone! It'll be uploading overnight. I will post it in the morning.

UPDATE: Looks like it may be delayed. AFH seems to be having issues and wont let me upload the build. Sorry for the delay. Will post ASAP."

[Rizsi]

ROM]OP3Lite 2.4 - Debloated, Tweaked, and Fast[Aroma][OxygenOS 3.2.6][6.0.1][9/23]
You are not allowed to view links. Register or Login

Changelog:

2.4:
-Updated to OxygenOS 3.2.6
-Update Elemental X kernel to 0.22
-Removed Mono Kernel

[Rizsi]

[KERNEL] [September 23] ElementalX-OP3 0.23 (OOS) 0.31 (cm)
OxygenOS/HydrogenOS/Stock-based ROMs: You are not allowed to view links. Register or Login

CyanogenMod and CyanogenMod-based ROMs: You are not allowed to view links. Register or Login

Changes:
-prevent speaker gain from resetting
-update installer

[Rizsi]

Firmware updates only [OOS 3.1.2 -> 3.5.3]

OxygenOS Firmware:
3.1.2: You are not allowed to view links. Register or Login
3.1.3: You are not allowed to view links. Register or Login
3.2.0: You are not allowed to view links. Register or Login
3.2.1: You are not allowed to view links. Register or Login
3.2.2: You are not allowed to view links. Register or Login
3.2.4: You are not allowed to view links. Register or Login

3.2.6: You are not allowed to view links. Register or Login (new fingerprint firmware)

Community Build Firmware:
3.5.0: You are not allowed to view links. Register or Login
3.5.1: You are not allowed to view links. Register or Login

3.5.2: You are not allowed to view links. Register or Login (new bootloader and fingerprint firmware)
3.5.3: You are not allowed to view links. Register or Login (new bootloader and fingerprint firmware)

[Sharp]

Én most legutoljára az OP3Lite 2.3-ra ráengedtem a gyári 3.2.4-et, mert jelezte. TWRP felismerte, telepítette. Utána visszaraktam a TWRP-t, rootot és az xposed cuccot. Aztán töröltem a Titanium Backupban az első helyen levő tizenpár appot, amit újnak ismert fel és mind a rendszer része (az OP3Lite-ból töröltek). Ja és persze az Ex kernel is ment vissza. Szerintem így megkaptam az OP3Lite 2.4-et, csak akkor ez még nem jött ki, amikor én mindezt megtettem... Természetesen minden program, beállítás megmaradt.

[TaRsY]

Én most legutoljára az OP3Lite 2.3-ra ráengedtem a gyári 3.2.4-et, mert jelezte. TWRP felismerte, telepítette. Utána visszaraktam a TWRP-t, rootot és az xposed cuccot. Aztán töröltem a Titanium Backupban az első helyen levő tizenpár appot, amit újnak ismert fel és mind a rendszer része (az OP3Lite-ból töröltek). Ja és persze az Ex kernel is ment vissza. Szerintem így megkaptam az OP3Lite 2.4-et, csak akkor ez még nem jött ki, amikor én mindezt megtettem... Természetesen minden program, beállítás megmaradt.

De ha pl a lite fejlesztoje a build.prop-ba is belenyult,  azt mar buktad is.

Sent from my ONEPLUS A3003 using Tapatalk

[Rizsi]

[KERNEL] [OnePlus3] [OOS] Boeffla-Kernel (26-09-2016)
You are not allowed to view links. Register or Login

This kernel will NOT work on CM builds !!!


Version 1.0-beta6
26.09.2016
Change: Revert again to wifi driver 4.4.31.76, which was used in previous betas
Fix: QuadRooter vulnerability CVE-2016-2504) fixed (latest OnePlus OOS sources erroneously do not contain the fix, escalated to OnePlus already)

[Sharp]

De ha pl a lite fejlesztoje a build.prop-ba is belenyult,  azt mar buktad is.

Sent from my ONEPLUS A3003 using Tapatalk

Ha belenyúlt. Nem észlelek különbséget. A dpi-t lejjebb vettem, ahogy szoktam.

[Rizsi]

[KERNEL] [OnePlus3] [OOS] Boeffla-Kernel (27-09-2016)
You are not allowed to view links. Register or Login

This kernel will NOT work on CM builds !!!

Version 1.0-beta7
27.09.2016
Experimental: Added microphone gain control (it is completely untested, so I am not sure whether it works at all or not; if it works, I do not know what all is affected by the gain - you tell me)
Change: Boeffla-Sound bugfixes
Change: KCAL initialization changed (if switched to off, it should never do anything during bootup)

[KERNEL] [OnePlus3] [CM13] Boeffla-Kernel (27-09-2016)
You are not allowed to view links. Register or Login

This kernel will NOT work on OOS or any other builds than CM !!!

Version 1.0-beta6
27.09.2016
Update: Updated with latest official CM kernel commits as of 27.09.16, 8am CET
Change: Boeffla touchkey LED control duration now configurable in milliseconds instead of seconds
Experimental: Added microphone gain control (it is completely untested, so I am not sure whether it works at all or not; if it works, I do not know what all is affected by the gain - you tell me)
Change: Boeffla-Sound bugfixes
Change: KCAL initialization changed (if switched to off, it should never do anything during bootup)

[Rizsi]

[ROM][AROMA] FreedomOS 1.7-CE/1.5.1 [OxygenOS 3.5.2/3.2.6]
3.2.6-os buildbol keszitett verzio: You are not allowed to view links. Register or Login

1.5.1-op3
669eddfc · update elemetalx aroma from 0.21  · 7 days ago
UPDATE: ElementalX 0.21
ADD: disable touchboost setting
UPDATE: upstream WiFi change
FIX: ElementalX wifi module installation (my bad)

3.5.2-es community buildbol keszitett verzio: You are not allowed to view links. Register or Login

1.7-CE-op3
669eddfc · update elemetalx aroma from 0.21  · 7 days ago
UPDATE: SuperSU 2.78 SR1
UPDATE: Substratum 223
UPDATE: ElementalX 0.20
UPDATE: OxygenOS 3.5.2 Community Build
ADD: “kill all background processes” button in recents menua
ADD: Long press options in messages application
OPTIMIZE: Incoming call notification UI
ADD: Manual “check for update” button
ADD: Additional directions for first fingerprint configuration
ADD: Battery Saver mode optimizations and enhancements
ADD: Back contacts widget in launcher
OPTIMIZE: Dialer speed
ADD: New modes added in control panel (night mode and battery saver)
ADD: Support for PIN codes up to 6 digits
UPDATE: XposedInstaller
And under the hood change, check gitlab for more information.
NOTE: Support f2fs support for the /data (not tested)

[Sharp]

You are not allowed to view links. Register or Login:

2.4.1:
-Fixed no wifi when Elemental kernel is installed
-Update Elemental X kernel to 0.23
-Updated to SuperSU 2.78 systemless root

[Rizsi]

OnePlus 3 OxygenOS 3.5.3 Community Build 2016-09-28
Device OnePlus 3
Version 3.5.3 Community Build
Update time 2016-09-28
File size 1.3 GB
MD5 hash a7001c76c5c4b23483bd8de24ac63ff7

You are not allowed to view links. Register or Login

What's new:
Use AOSP clock as default clock
Added capability to uninstall some preinstalled apps, like FileManager, Weather, Recorder, MusicPlayer
Added expanded screenshots, you can now save a long screenshot of a scrollable page to cover more contents.
Added celluar data firewall, you can control whether an app is allowd to use cellular network or WiFi
Added“Favorite contact setting”in Priority mode
Setting menu adjustment in Messages, added option to vibrate phone when receiving SMS
Contact UI redesign
Fixed community build cannot flash back to official build issue
General bug fixes

[Rizsi]

You are not allowed to view links. Register or Login:

2.4.1:
-Fixed no wifi when Elemental kernel is installed
-Update Elemental X kernel to 0.23
-Updated to SuperSU 2.78 systemless root

Nekem van WIFI-m 2.4.0-as Freedom ROM-ban EX kernellel. Igaz nem a benne levo 21-est tettem fel hanem mar a 23-mast.

Update: Ejjel lattam, hogy az EX kernel manager jelezte, hogy van uj kernel, 24-es. Megneztem meg nincs fent AFH-on.

[Sharp]

Nekem van WIFI-m 2.4.0-as Freedom ROM-ban EX kernellel. Igaz nem a benne levo 21-est tettem fel hanem mar a 23-mast.

Update: Ejjel lattam, hogy az EX kernel manager jelezte, hogy van uj kernel, 24-es. Megneztem meg nincs fent AFH-on.

Most már lejött a 24-es, települt is.