[KERNEL] [OnePlus3] [OOS] Boeffla-Kernel (06-09-2016)
You are not allowed to view links.
Register or
LoginChange logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for OxygenOS 3.x.x kernel - Click here
Known issues
KCAL driver is not fully compatible yet with msm8996, so do not switch it off in Boeffla-Config and refrain to use the negative mode
Compatibility
Important: This kernel is only meant to be compatible with official OnePlus OOS and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Features
Note: This kernel only runs on OOS 3.x.x for the OnePlus 3 - nothing else !!!
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.02 or higher !!!) configuration app (get it from You are not allowed to view links.
Register or
Login) to configure all kernel settings
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: Impulse, zzmoove, elementalx, conservative, ondemand
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid and zen
CPU overclocking - one additional overclocking step for both clusters (1,72 GHz for little CPU / 2,26 GHz for big CPU)
No GPU overclocking, no CPU and GPU voltage interface
CPU core profiles to restrict number of CPU cores being used (the OP3 does not hotplug based on load)
Notification LED control (effect + speed for blinking/fading, brightness for continuous notification like battery charging etc.)
Boeffla-Sound engine: Headphone volume and speaker volume (only lowering volumes for speaker)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control (not yet fully compatible to msm8996, expect side effects)
Swipe2wake gestures
Control haptic feedback of gestures (except fingerprint)
Haptic feedback intensity control
Swipe2sleep gestures
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys are locked as long as screen is in use (touched) for better usability
Swap supported
Various minor kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.24.2 (own compilation)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest OOS kernel sources (You are not allowed to view links.
Register or
Login)
