"Using USPL under Vista or Windows 7
If you want to use USPL under Windows Vista (or Windows 7 ) this is the procedure. Actually I'm going to describe the procedure for Windows 7, but it should be the same.
If you are using Windows Vista 64 bit, you will have to reboot your system, press F8 immediately before Windows starts loading and select “Disable Driver Signature Enforcement”.
Go to this topic and download the USBAS.zip file.
Extract all files into one folder.
Put the HD in bootloader mode. Just turn it on while holding down the Volume down button. (Note: When the SD card is present the boot loader might try to read a custom ROM of of that. Remove the SD card to get the 'regular' boot loader)
Right-click "Computer" in your start menu.
Click on "Manage"
In the left panel, click on "Device Manager"
In the right panel, find "Mobile devices" and expand it.
You should see HTC USB Sync. Doubleclick it, and pick the "Driver" tab.
Click on "Update driver".
Select "Browse my computer for driver software"
Click on "Let me pick from a list blah blah"
Click on "Have Disk...", then on Browse
Select the wceusbsh.inf file in the folder you have created in step 2.
Click on Next and wait for it to finish...
Ignore the message which sounds like "The driver was installed, but the device cannot start". Just unplug it and plug it again.
Now you can use USPL. Luckily, you won't need to repeat these steps every time.
Now the question is: which ROM do you want to flash? If you want to flash any custom ROM which you find here, there is no problem. Pick any that you like. Then...
Download the ROM you want to flash and extract all the files. If the zip file contains both a nbh file and an exe with a name like CustomRUU.exe, BlackstoneCustomRUU.exe, BlackRUU.exe or anything like this, then go to step 3.
Download ~Blackstone_CustomRUU_v1.0.zip from the first post of this thread, and extract the only file in it into the same folder of the nbh file of the ROM. If your antivirus detects a virus in it, just ignore the warning (and/or disable the antivirus). It's a false positive.
Download the latest version of USPL (currently 2.5). Again, if your antivirus detects a virus in it, just ignore the warning (and/or disable the antivirus). It's a false positive.
Put your device into bootloader mode.
Connect your device with the USB cable.
Run Blac_uspl.exe, and make sure that you see "SPL-1.15.USPL" on the display.
Run the blahblahRUU.exe file and follow the instructions on the screen. It will be up to it read your nbh file and flash it.
The only problem is if you want to flash an official ROM which does not match your phone "native" language. In this case, you have to follow exactly the same procedure as above, and it will work perfectly almost for sure, but you must be aware that this may be dangerous. In fact, official ROM do also include a SPL in ther package, which will also be reflashed. Flashing SPL is always a bit dangerous, because if it fails your phone may be unusable and you may have to send it to HTC. Therefore it is not recommended to flash a SPL through USPL.
Again, if you want to flash an official ROM which matches your phone serial number (so if you are in Spain, for example, a spanish official ROM), you don't need anything of this, not even USPL. Just download it and run it, that's it. I hope this helps.
For further information about the 1.56 ROM and the SPL you have installed, read this wiki page "
Ezt segítene valaki megérteni ?
