Értem,akkor elmondom mit csináltam tegnap:
Találtam egy tutorialt, amit elkezdtem követni:
Tutorial to Root and install the new rom!
Requirements:
You are not allowed to view links.
Register or Login ACER_LiquidE...bin
You are not allowed to view links.
Register or Login Acer Liquid drivers for Windows
You are not allowed to view links.
Register or Login Acer A1 Download Tool
You are not allowed to view links.
Register or Login Superboot
Our latest ROM, look for it here: You are not allowed to view links.
Register or Login
1) Unpack the drivers.
If you have a 32-Bit version of Windows, go to the folder x86, if you have a 64-Bit version, go to the x64 folder.
Then run the setup.exe and follow the instructions to install the drivers.
2) Unpack the Acer A1 Tool.
Run the ACER Download Tool. Click "Browse" and select the downloaded ACER_LiquidE...bin. Attach your Acer Liquid while it is normally turned on using a USB cable. when the ACER Download tool says 'Connected' in green, then press Start. It should start flashing the stock Éclair image.
Don't interrupt this process!!
This will take some time so be patient, and when it is complete it should say something like successfully flashed rom in ACER Download Tools.
Én idáig jutottam!
Ekkor feltelpült a rom és teljes mértékben tudtam használni
Igazából nem értem hogyan lehet ez.
Mert a tutorial így folytatódik:
WHILE THE PHONE IS STILL PLUGGED INTO THE COMPUTER USING USB
3) Unpack the Superboot.zip into a folder that you can find
Run the install-Superboot-<Your OS>.bat or .sh.
***NOTE, when i tried this it just said 'waiting for device' in a CMD window and did not do anything. im not sure at this point if what i did was right or if i was supposed to know this lol....i just assumed things and it worked out okay...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~
what i did from here is that i followed this:
if the phone is on, turn it off.
UNPLUG THE PHONE FROM THE USB
PRESS Volume Up + Camera button + Power button, the phone will vibrate twice but stay turned off, take the battery out, and plug the phone into the computer again using the usb cable.
at this point u should see it saying USB fastboot: and stuff, the last line should say usb_init. the top of the screen i believe is supposed to flicker.
IF U DONT SEE THIS and the phone turns back on as normal, try it again.
PUT THE BATTERY BACK IN.
NOW run the install-Superboot-<Your OS>.bat or .sh.
and it should work, you should see a few things happening on ur phone and in the CMD window on ur computer. and ur phone will restart
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~
THE PHONE SHOULD STILL BE CONNECTED BY USB TO UR COMPUTER
Wait until it's booted and then put our latest ROM .zip into the root of the SDCard. root means the main area of ur SD card, not inside a folder or anything.
Double-Click the file "Reboot to recovery.bat". which is located in ur superboot folder on ur laptop
Then wait until the device is rebooted into recovery. u should see a menu screen of sorts with a bunch of options. u can navigate this by following the instructions on the screen (volume up down to go through the menu and the MENU button (most right button) to select things).
Navigate to "apply any .zip from SD" and push the menu key, and then choose the ROM and press menu again. it should ask to confirm this by pressing the home button (the most left button).
Wait for the installation to finish.
Reboot.
Congrats, you're done!
De mondom, én ezt már nem csináltam meg. Szóval 2.1-en vagyok, a levelezés végre újra normálisan működik,bár picit lassabb a rendszer.
Igazából amíg a romot telepítette A1 toolból néztem miket ír ki a készülék, és kiírt néha superboot-os szöveget is még csodálkoztam is rajta.
Nos, mi a fenét csináltam én,hogy gyakorlatilag csak egy liquidE.bin fájlt futtattam, superbootos parancsokat is lefuttatott, akksit ki se vettem stb......és mégis van egy elméletileg nem hivatalos és működő rom az S100-mon?
Komolyan érdekelne.........